Dependence of grip strength on shoulder position and its implications for ergonomics practice

Grip strength (GS) variability due to positional changes in the upper extremity joints is of importance while designing workstations and work methods. This study was conducted to analyze the GS variations due to positional changes at shoulder joint when some important variables were under control. The GSs of dominant and nondominant hands were measured in eight shoulder (0°, 45°, 90°, and 135° of flexion and abduction) and standard test positions (STP). One hundred and thirteen subjects 20–30 years old completed the study. At the dominant side, no significant difference was observed in the pairwise comparisons between STP and the others. Maximum and minimum GSs were obtained in 0° abduction and 45° flexion and abduction, respectively. At the nondominant side, GSs were significantly lower (p < 0.001) in the corresponding test positions and demonstrated more variability. The findings of this study can contribute to the available knowledge to guide occupational ergonomists in their practices.     

基于改进粗糙集理论的SAR图像目标增强

图像增强在提高SAR图像舰船目标检测精度方面具有十分重要的意义。由于传统算法不能很好地对SAR图像进行目标增强，提出了基于改进粗糙集理论和引力场强度的目标增强算法。通过借鉴引力场相关理论知识，将粗糙集条件属性集中的梯度属性改进为引力场强度属性，从而实现对原图像的目标增强。与其他算法进行了实验比较，结果表明提出的改进算法相比于其他算法更适用于SAR图像特性，能更好地对舰船目标像素进行针对性增强，具备一定的工程应用价值。     

Ti-xCr-yCu钛基材料的制备及组织性能研究

通过粉末冶金法制备了Ti-xCr、Ti-yCu及Ti-xCr-yCu钛基材料,研究了Cr、Cu含量对其相组成、显微组织、压缩屈服强度、弹性模量以及切削加工性能的影响规律。结果表明:随Cr含量的增加,Ti-xCr钛基材料依次出现了Ti_4Cr、TiCr_2及Cr相,其压缩屈服强度表现出先增大后减小的趋势,当Cr含量为10%时其屈服强度达到最大值(710 MPa),同时,添加Cr元素有利于降低钛基材料的弹性模量,最低可达25 GPa。添加Cu元素的钛基材料,随Cu含量的增加,Ti_2Cu相增加,并且显微组织细化,屈服强度降低;弹性模量受Cu含量影响较小而受烧结温度影响较大。添加Cr和Cu元素的钛基材料,其显微组织主要为网篮组织,弹性模量低于纯钛,其中添加Cu元素有利于细化层片,添加Cr元素有利于细化等轴组织。此外,Cr含量为5%时,钛基材料具有较佳的切削加工性能。     

Engineering the Structure of Mesoporous Bioactive Glass Microspheres by the Surface Effect of Inverse Opal Templates and Temperature

The interactions of ions and molecules with material surface are highly dependent on the surface properties of the material. Therefore, the distribution of ions or molecules near the material surface may be affected by the surface properties. This phenomenon can be significant enough for controlling the structure of a material synthesized in the sub‐micrometer scale confinement space of a template. This work confirms that inverse opals are perfect templates for offering confinement space, while their different surface properties can strongly affect ion and block copolymer distribution in the confinement space. This surface effect principle can be used for the controlled synthesis of colloids with complex composition. As an example, four kinds of mesoporous magnetic bioactive glass colloids with ordered mesopores, core–shell structure, open surface pores, or disordered mesopores are prepared by using polystyrene and carbon inverse opal templates. This work reveals that inverse opal templates possess great advantage in controlled synthesizing colloidal structures due to their surface effect on ions and molecules and confinement space.     

罩式退火温度对高强IF钢组织及性能的影响

为研究不同退火温度下高强IF钢的组织性能及织构的变化规律,采用温箱式电阻炉加热模拟罩式退火工艺,研究了不同退火温度下高强IF钢210P1冷轧板力学性能;对不同退火温度钢板的r90进行了统计并对其进行显微组织观察;采用X射线衍射仪及热场发射扫描电镜对不同退火温度的罩式退火成品板进行了织构分析。结果表明,在高强IF钢210P1冷轧板的罩式退火过程中,提高退火温度将使晶粒明显长大。随着退火温度的升高,屈服强度及抗拉强度下降,伸长率升高,n值略有上升,板材横向r值增加较明显,有利织构{111}取向密度增加,不利织构{100}取向密度降低。     

含齿形裂隙类岩石材料单轴压缩试验研究

为研究含齿形裂隙岩石在单轴压缩下的破坏特征及强度特性，制作了含不同裂隙倾角和起伏角的齿形裂隙类岩石材料试件，并采用岩石力学伺服试验机进行单轴压缩试验。试验结果表明：（1）试件主要产生拉伸、剪切和拉剪复合裂纹，且根据裂纹的扩展路径可划分为A型（拉伸破坏）、B型（剪切破坏）、C型（复合破坏）3种破坏模式，裂隙倾角对试件最终破坏模式影响显著；（2）当裂隙倾角较小时，试件应力—应变曲线为多峰曲线，随着裂隙倾角的增大，曲线呈单峰形式，表现为延性减弱，脆性增强，而裂隙倾角相同但起伏角不同的试件应力—应变曲线大致相同；（3）当裂隙起伏角相同时，试件当量峰值强度随裂隙倾角的增大呈先减小后增大的规律，且裂隙起伏角对试件当量峰值强度的影响小于裂隙倾角。